Commit Graph

3001 Commits

Author SHA1 Message Date
github-actions[bot] 7ad2bbd391 Regenerate generated files and fold pending files [skip ci] 2026-10-29 08:12:10 +00:00
austin62jake c10d36a0b5 Tests: Open Linked Design waits for the part as settle waits for a load (#8716)
menu_tests::linked_component_opens_its_part_in_a_tab_and_reports_a_missing_source
gave the background open of the linked part 600 frames. Headless frames
are quick, so on a loaded machine (the whole ui-egui suite at once) the
read can take longer, and the test then found the assembly still shown.
It now waits until the part is open, up to 120 s as Harness::settle and
the edit-in-place tests wait for a load.

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 07:37:20 +00:00
raykholo aee57875f5 Sketch Fillet: 3D sketch lines are not offered and say they can't be filleted yet (#4160) (#4177)
* claim: #4160

* Sketch Fillet: 3D sketch lines are not offered, and say they can't be filleted (#4160)

The Fillet tool offered 3D sketch lines as picks, and sketch.fillet then
refused them with "`a` must be a line". The tool no longer offers them, and
the command refuses them with "not supported yet: filleting 3D sketch lines".

* Sketch Fillet and Chamfer: refuse all spatial sketch curves (#4160)

* Sketch corner test: give the picked curve its point (#4160)

main added a point to sketch-curve hits after this branch was written.
2026-10-29 07:22:53 +00:00
Nathan Dane d2fcab8432 Render shot editor: camera and frame controls, aspect presets, guides and frame overlay (#6281) (#7232)
* Render shot editor: camera and frame controls, aspect presets, guides and the frame overlay

* Render shot: Shot editor and Scene overview to the approved design

* Distinguish Render stage variants from native window frames

* fix: restore library inspection after clearing shot selection

* test: follow the merged Output Check navigation

* test: inspect Check without requiring a preflight result

* test: cancel Shot removal through its shared dialog action

* fix: remove obsolete Inspector stage form after editor integration

* fix: preserve Appearance Advanced when clearing Wear focus

* test: expect the dedicated Check editor from Scene overview
2026-10-29 07:03:24 +00:00
github-actions[bot] c7a1cee357 Regenerate generated files and fold pending files [skip ci] 2026-10-29 07:43:09 +00:00
semmelrinde 883f8e8e90 Save: the status line says where the design was saved (#8693) (#8705)
Saving gave no sign that it worked, while an export names the file it wrote.
After Save or Save As, the status line now reads "Saved <path>".

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 06:48:35 +00:00
github-actions[bot] a6b272dec8 Regenerate generated files and fold pending files [skip ci] 2026-10-29 07:13:25 +00:00
github-actions[bot] 2a749f4294 Regenerate generated files and fold pending files [skip ci] 2026-10-29 07:06:44 +00:00
semmelrinde 5241c64aa6 Sketch solver: eliminate row by row on slices, so the dense solve vectorises (#8631)
The dense solve updated each matrix element through bounds-checked get/add;
on slow scripted drags it was most of the time. The same operations in the
same order on row slices give bit-identical solutions, about twice as fast.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 06:39:05 +00:00
raykholo c688054db0 Canvas and Decal say where to click after the image is chosen (#4359) (#4396)
* claim: #4359

* Canvas and Decal say where to click after the image is chosen (#4359)

After picking an image the placement tool started silently, so it looked
as if nothing had happened. Show the tool's placement hint as a toast while
it waits for the click (translated), and end it once the image is placed.

* Canvas: include placement hint in viewport obstacles (#4359)
2026-10-29 06:17:35 +00:00
semmelrinde d77b0434dd English (UK): UK spellings for 43 messages that still had US ones (#8696)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 06:16:27 +00:00
N3MI-DG 0818ad0ed4 Preferences: typing in a number field edits it instead of searching (#8662) (#8663)
* claim: #8662

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Preferences: typing in a number field edits it instead of searching (#8662)

Type-to-search takes printable keys unless the focused field notes the key
sink. number_field (Autosave every, the Largest file to open limits) never
did, so its digits went into the search.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:32:25 +00:00
github-actions[bot] 54f74a613e Regenerate generated files and fold pending files [skip ci] 2026-10-29 06:38:44 +00:00
github-actions[bot] 74791e0220 Regenerate generated files and fold pending files [skip ci] 2026-10-29 06:29:24 +00:00
raykholo afe7dcd4e1 Allow sketch Mirror to use origin axes (#4193) (#4207)
* claim: #4193

* Sketch Mirror: an origin axis can be the mirror line (#4193)

Mirror accepted only a straight curve of the sketch. It now also takes an
origin axis that lies in the sketch plane ({axis: X|Y|Z}), projected into
the sketch as a fixed linked line, so the copies stay symmetric to it and
follow the source when it moves.

* Sketch Mirror: use current sketch store (#4193)
2026-10-29 05:08:00 +00:00
semmelrinde fed7ea0c88 Malay: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8667)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:03:26 +00:00
semmelrinde dfa8ae9a60 Hungarian: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8655)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:03:00 +00:00
semmelrinde 53b2f73d2e Bosnian: translate the 781 messages added since the catalog came in (#7813), the Render workspace included (#8682)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:02:58 +00:00
austin62jake 1dce42e744 Preferences: a drop-down's Search box keeps what is typed in it (#8675)
In Preferences, letters typed in a drop-down list's own Search box (the
Font list, a 3D mouse's button assignments) went to the Preferences search
instead, which then filtered the page, usually to "No matching
preferences", and closed the list. The Preferences search takes typing only
when no text field held the keyboard on the previous frame, and the
drop-down's Search box never said it did. On the full Interface page the
number fields' focus check covered for it; once a search hid them, as when
the Font row is found by searching for "font", nothing did.

The Search box in searchable_dropdown_with now reports that it has the
keyboard, as the Preferences search box does.

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 05:02:44 +00:00
semmelrinde aad3d56ec2 Serbian: translate the 781 messages added since the catalog came in (#7813), the Render workspace included (#8684)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:02:18 +00:00
semmelrinde 8719cc7b57 Swedish: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8660)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:02:06 +00:00
semmelrinde 651addda84 French: translate the 262 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8654)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:01:47 +00:00
github-actions[bot] dd16cc9faf Regenerate generated files and fold pending files [skip ci] 2026-10-29 06:02:10 +00:00
github-actions[bot] 6747ea0dcf Regenerate generated files and fold pending files [skip ci] 2026-10-29 05:53:14 +00:00
semmelrinde 4215fb11c2 Italian: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8656)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:01:40 +00:00
semmelrinde 504fe1afcb Dutch: translate the 262 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8657)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:01:37 +00:00
semmelrinde 7367b81ffe Romanian: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8659)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 05:01:33 +00:00
semmelrinde 183226d2b6 Turkish: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8661)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:55:04 +00:00
semmelrinde 514563187b Traditional Chinese: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8664)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:54:48 +00:00
semmelrinde 5286f50fd9 Ukrainian: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8665)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:54:42 +00:00
semmelrinde 46487216d0 Indonesian: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8668)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:54:24 +00:00
semmelrinde 39250092a3 Galician: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8669)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:54:18 +00:00
semmelrinde a1fd2be2c8 Norwegian Bokmål: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8670)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:54:11 +00:00
Nathan Dane bd8cb4e6d6 Render output: Effects and Check sections, Size presets panel and the Check chip (#6281) (#7233)
* Render output: Effects and Check sections, Size presets panel and the Check tool chip

* Render output: Sampling, Effects and Check editors as child rows under Output

* fix: restrict legacy Output controls to test builds

* fix: cover status controls and reveal Effects test targets

* fix: include shared quality reviews in copied check reports

* fix: remove the obsolete Effects GPU guard after Wear integration
2026-10-29 04:39:34 +00:00
Nathan Dane c1925bb219 Render appearance: click, drag and paint to assign, Pick Up, copy and paste (#6281) (#6431)
* Render appearance: click, drag and paint to assign, Pick Up, copy and paste, and Remove

* Exclude the workspace Shots strip from dialog width checks

* Exclude the collapsed Shots control from dialog width checks

* Retain assembly cache listings and measure actual dialog bounds

* fix: handle toast button rectangles in assignment status

* fix: restrict gallery note measurement helper to tests

* test: measure assignment help at the catalogue footer

* fix: share the command revision snapshot after restacking
2026-10-29 04:33:31 +00:00
mynoc 75035ac4a5 Color picker: add Hex alongside U8 and F (#7445) (#7450)
* claim: #7445

* Color picker: add shared Hex input mode (#7445)

Accept strict RGB/RGBA Hex input while preserving exact opacity,
opaque/PBR restrictions, invalid drafts and existing U8/F behavior.

Keep explicit English fallback entries for the three new Hex messages
in Arabic and Hebrew, which final integration main now requires as
complete catalogs. No Arabic or Hebrew translations are claimed.

The user authorized this feature-only commit after full cargo xtask ci
stopped at the pre-existing geometry nonminimal_bool lint. The same
failure was reproduced without this patch at the published claim and
main. No unrelated lint fix or suppression is included.

* i18n: cover complete catalogs for Hex picker (#7445)

Add the three Hex message keys to Vietnamese in the feature's pending
locale file. Keep the unchanged English source values as explicit
fallbacks; no Vietnamese translations are claimed.

Audit the complete-catalog set (ar, he, ja, vi, zh) rather than only
the first catalog reported by CI. Preserve the existing completeness
test and all picker/Appearance code.

The completeness regression changes from red to green. Full local CI
and wasm checks remain blocked by failures independently reproduced
in clean upstream main; no unrelated fixes or suppressions are added.

* Appearance: use the shared opacity-aware color picker in Render (#7445)

Route the merged Render Appearance editor through the UI-kit picker,
passing exact opacity only for non-PBR looks. Keep a non-editable mixed
label and treat explicitly accepting the first color as a mixed edit.

Remove the external Hex field and duplicate parser, replace its gallery
entry with the shared mixed-aware picker, and update the control contract.

Preserve existing regression assertions and add actual Render UI tests
for alpha edits, precision, invalid drafts, PBR rejection and mixed edits.

Full local CI and wasm were run before this commit and remain blocked
by the separately reproduced unchanged upstream geometry lints and
prefs.bytes wasm error. No unrelated fixes or suppressions are included.

---------

Co-authored-by: mynoc <298906611+mynoc-96@users.noreply.github.com>
2026-10-29 04:33:10 +00:00
github-actions[bot] ae47ed342b Regenerate generated files and fold pending files [skip ci] 2026-10-29 05:24:00 +00:00
Mike111177 03cf8f3e90 Configuration table: a filter in the Add Column menu (#8086) (#8088)
* claim: #8086

* Configuration table: a filter in the Add Column menu (#8086)

The + menu listed every parameter, feature suppression and body
material/appearance with no way to narrow it. A filter field now sits at
the top, takes focus when the menu opens, narrows the entries and the Face
Appearance submenu as typed, picks a lone match on Enter and clears when
the menu closes. A click into the field keeps the menu open (plus_header
closes on outside clicks; entries close it themselves), and the list keeps
its full height after the filter has emptied it once.

New kit element ui_kit::menu_filter (glyph, frameless editor, rule) so the
field does not read as an entry; gallery, i18n guard and docs/ui-kit.md
updated. Regression test in manage_dialogs_tests.
2026-10-29 04:20:42 +00:00
MarkusRe 0baf49b25f Windows: never load a dxcompiler.dll found on PATH; FXC unless DXC ships beside the app (#6756) (#7923)
* claim: #6756

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Windows: never load a dxcompiler.dll found on PATH; FXC unless DXC ships beside the app (#6756)

wgpu's Dx12Compiler::Auto loads dxcompiler.dll by name, so Windows takes the
first one on PATH. SolidCraft ships none, and DXC 1.8.2505 from other programs'
folders (Obsidian, NVIDIA SDK Manager) crashed every start with
EXCEPTION_ILLEGAL_INSTRUCTION during the viewport shader compile.

solidcraft_gpu::dx12_compiler() now chooses: WGPU_DX12_COMPILER as wgpu reads
it when it names a compiler; otherwise DXC from the dxcompiler.dll beside the
program, by its full path, else FXC. The window, the headless/CLI instance and
the test helpers start with it, and dx12_compiles_with_fxc follows it.
WGPU_DX12_COMPILER=dxc keeps the old lookup.

Fixes #6756

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:14:57 +00:00
github-actions[bot] 9bcda52408 Regenerate generated files and fold pending files [skip ci] 2026-10-29 04:45:23 +00:00
semmelrinde f4e52c4d3e Sketch: points tied only through a removed curve's end stay tied (#8640)
* Sketch: points tied only through a removed curve's end stay tied

Removing a curve removed its orphaned end points with their constraints, so
two points made coincident with such an end lost their tie although they
still met: two rectangles' corners on one arc end came apart when the arc
was trimmed. They are now tied to each other before the point goes.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Sketch: keep the tie test with the other trim tests

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:14:22 +00:00
semmelrinde 2da969cf5c Czech: translate the 264 messages the catalog lacks, Render panels and point clouds included (batch 6) (#8653)
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:14:04 +00:00
NOWN-DEV dd8308e835 Naming: a face swept from one of many sketch curves is named without measuring every curve (#8643)
Naming a face swept from a sketch flattened every curve of the sketch to
a polyline and measured its distance to each, for every face. On a sketch
with thousands of curves (a sheet with many cut-outs) that grew with
curves times faces. The curves are now flattened once per feature, each
with its box, and a curve whose box is farther than the best distance so
far is not measured.

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 04:12:56 +00:00
Colin Faulkingham 6f9788ccba Browser: move a component under another by drag and drop (#5164) (#8532)
* claim: #5164

* Browser: drag a placement row onto another to move it into that component (#5164)

---------

Co-authored-by: Colin Faulkingham <colinfaulkingham@Colins-Mac-mini.local>
2026-10-29 04:01:21 +00:00
github-actions[bot] 46a6686380 Regenerate generated files and fold pending files [skip ci] 2026-10-29 04:15:14 +00:00
CaRLymx ec76068a0b Spanish (es-ES): catch up with en.json (#6899)
* Spanish (es-ES): catch up with en.json

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

* Navigation preferences: name the Shift key through the catalog

Spanish now translates the key name, so the page painted it in English.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: bherbruck <brennen.herbruck@gmail.com>
Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 03:42:24 +00:00
Colin Faulkingham 99664a4d35 fix: keep expression move distances on world axes (#7234) (#8508) 2026-10-29 03:39:39 +00:00
froglemonade2 e55eff7c5d Orbit about the cursor: on an edge or sketch line, turn about the point under the cursor (#7356) (#7358)
* claim: #7356

* Orbit about the cursor: on an edge or sketch line, turn about the point under the cursor (#7356)

With Orbit around: point under the cursor, a drag that starts on a body
edge turned about the edge's middle, which on a long edge is far from
the cursor, and one that starts on a sketch curve turned about the
centre of the bodies in view. Edge and sketch curve hits now carry the
point under the cursor, which the pick already measured, and
pivot_under uses it. An edge hit's `mid` is unchanged, so selections
still record the edge's middle.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>

---------

Co-authored-by: Claude Opus 5.5 <noreply@anthropic.com>
2026-10-29 03:36:05 +00:00
austin62jake d8d22cd52a 3MF export: a component's bodies as one object with parts (#8139) (#8187)
* claim: #8139

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

* 3MF export: a component's bodies as one object with parts (#8139)

file.export and file.save_mesh wrote every body as its own 3MF object and
build item, so a slicer loaded a multi-body part as separate objects and
could arrange them apart on the bed. With objects: "component", each placed
component that holds two or more bodies is written as one object whose
<components> are its bodies' meshes, built once, so PrusaSlicer, OrcaSlicer,
Bambu Studio and Cura load it as one object with a part per body, each of
which can take its own filament. The design's own bodies, and a component
with a single body, stay objects of their own. The default (objects: "body")
writes the same file as before.

- io: model_xml_parts and write_3mf_parts write the parts; export_with_parts
  maps body names to them. model_xml_with and export_with_quality give the
  same output as before.
- engine: mesh_parts reads `objects` (component is refused for formats
  other than 3MF); component_parts groups the placed bodies by placement,
  each part named after its occurrence (Bracket:1, Bracket:2).
- file.save_mesh passes the parts on when it also sends the file to a slicer;
  file.send_to_slicer's own folder export is unchanged.

Fixes #8139.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_019FAWPuFoh9qxn2uS2j53QZ

---------

Co-authored-by: Claude <noreply@anthropic.com>
2026-10-29 03:35:38 +00:00
Nathan Dane 40ff251e5f Render wear: a Wear row and editor for the aging layers (#6281) (#7459)
* Render wear: a Wear row and editor for the aging layers

* test: read Wear header text from accessibility label values

* test: restore body picks for Wear header recovery assertions
2026-10-29 03:29:10 +00:00